ultraRendu – V 1.3
The Sonore ultraRendu project is an extension of the microRendu project that came before it. The design is inspired by audiophile gear and meant to bring grace and simplicity to a microcomputer. The original microRendu was very small and intended to be hidden out of sight behind your other gear. The ultraRendu can be powered by your favorite power supply. The ultraRendu remains as an Ethernet input and USB-Audio output, but all the connectors are located on the rear of the unit for easy cable routing. The ultraRendu utilizes a new proprietary printed circuit board with only the essential components and many updates to match its ultra designation. The best way to connect the ultraRendu to a USB device is via your favorite USB cable. The ultraRendu is easy to configure, accepts streams from various sources, and includes our latest version of our operating system Sonicorbiter.
Selectable Output Modes
Mode #1 – SqueezeLite Output – This output works with any Logitech Media Server and compatible controllers. This output supports true gapless playback of PCM, DSD/DoP, and native DSD.
Mode #2 – ShairPort Output – This is an AirPlay emulator that utilizes streams sent to it from a compatible source. This output supports true gapless playback of PCM.
Mode #3 – MPD/DLNA Output:
Mode #3a – DLNA Output – This output utilizes streams from UPnP/DLNA servers and controllers. This output can be configured as an OpenHome renderer. This output supports true gapless playback of PCM, DSD/DoP, and native DSD.
Mode #3b – MPD Output – This output is intended to work with an SMB mount. This output supports true gapless playback of PCM, DSD/DoP, and native DSD.
Mode #3c – Songcast Output – This output accepts streams from your computer running Linn Songcast. The application is in Beta form.
Mode #4 – HQ Player NAA Output – This output utilizes streams from Signalyst’s HQ Player running on your computer. Digital signal processing is performed by HQ Player and then asynchronously streamed to the Network Audio Adapter (NAA) output. This output supports true gapless playback of PCM, DSD/DoP, and native DSD.
Mode #5 – RoonReady Output – This output utilizes streams from Roon. This output supports true gapless playback of PCM, DSD/DoP, and native DSD.Mode #6 – Spotify Connect Output – This output can be controlled by your computer or tablet running the Spotify application. This application is based on librespot which is an open source client library for Spotify. The application is in Beta form.
Supports the following PCM sample rates up to: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, and 768kHz
Supports the following DSD sample rates up to: DSD64, DSD128, DSD256, DSD512
POP free DSD/PCM transitions
Not all USB devices or output modes support the maximum sample rate of the unit
Audirvana Plus certified
Running Logitech Media Server locally allows playback of local radio stations and streaming service
Logitech Media Server allows you to use the unit as a UPNP server in combination with Drive Mounter
The Software Manager that allows you to install and uninstall apps as needed
BubbleUPnP Server app allows any renderer to take advantage of the OhMedia – OpenHome protocol
OhMedia – OpenHome protocol allows the Linn Kinsky and Linn Kazoo Apps with playlist support to be used as controllers
Supports Tidal and Qobuz lossless streaming via thrid party applications
Native DSD supported
The unit is controlled via third-party apps on your mobile device and on your computer
Based on Sonicorbiter, closed source and open source (GPLv2)
- Matching case to the Uptone Audio UltraCap power supply
- Six (6) high-quality ultra low noise regulators
- Fixed frequency high-quality ultra low jitter FEMTO oscillator
- External power input jack
- RJ45 input connector
- USB-A audio output connector
- Micro SD port for the operating system
- Multicore processor with DDR3 RAM
- Voltage input: 6-9 VDC, 9 VDC not recommended
- Current input: 2A peak current and 1A continuous current
- Operating Conditions: up to 73 F/22.8 C
- Power connector: 2.1mm x 5.5mm (center +)
- Dimension without rubber feet: 1.181″(H)x4.331″(W)x4.409″(D)
What’s in the box?
Includes: ultraRendu, Rubber Feet (4), Warranty Information, Product Set-Up Instructions
A power supply is not included unless you add one above. We recommend using a Sonore Linear Power Supply or a SGC Linear Power Supply to feed this device. Please check the links to these products below.
|Release Date||December 13, 2022|
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.